The P25D10H is a serial interface Flash memory device designed for use in a wide variety of high-volume consumer based applications in which program code is shadowed from Flash memory into embedded or external RAM for execution.
P25D10H's Features
1. Single 2.30V to 3.60V supply
2. Industrial Temperature Range-40C to 85C
3. Serial Peripheral Interface (SPI) Compatible: Mode 0 and Mode 3
4. Single, Dual IO mode
- 4M/2M/1M/512K x 1 bit
- 2M/1M/512K/256K x 2 bits
5. Flexible Architecture for Code and Data Storage
- Uniform 256-byte Page Program
- Uniform 256-byte Page Erase
- Uniform 4K-byte Sector Erase
- Uniform 32K/64K-byte Block Erase
- Full Chip Erase
6. Hardware Controlled Locking of Protected Sectors by WP Pin
7. One Time Programmable (OTP) Security Register
- 3*512-Byte Security Registers With OTP Lock
8. 128 bit unique ID for each device
9. Fast Program and Erase Speed
- 2ms Page program time
- 8ms Page erase time
- 8ms 4K-byte sector erase time
- 8ms 32K-byte block erase time
- 8ms 64Kbyte block erase time
10. JEDEC Standard Manufacturer and Device ID Read Methodology
11. Ultra Low Power Consumption
- 0.6uA Deep Power Down current
- 9uA Standby current
- 2.5mA Active Read current at 33MHz
- 3.0mA Active Program or Erase current
12. High Reliability
- 100,000 Program / Erase Cycles
- 20-year Data Retention
13. Industry Standard Green Package Options
- 8-pin SOP8 (150mil/208mil)
- 8-land USON8 (3x2x0.55mm), (3x2x0.45mm), (3x4x0.55mm)
- 8-land WSON8 (6x5x0.75mm)
- 8-pin TSSOP8
- WLCSP
- KGD for SiP
P25D10H’s Block Diagram
P25D10H’s Package
P25D10H’s Ordering Information
桑尼奇科技是深圳市知名的IC代理商,能為廣大工程師與采購朋友提供眾多類型產品,小批量當天交貨,10K以上5-10天交貨。